AOZ Studio V1 (TBD bugs clean/-> V2)

In the following example, the boxes drawn should be drawn using the same high intensity color that I see on the Plot statements used in the corners of each box:

Screen Scale 0,3,3 ' Zoom in to see the detail

Dim X(72),Y(72)
For i=1 TO 72
    Read X(i),Y(i)
Next i
Data   1,0,   1,20,   1,40,   1,60,   1,80,   1,100,   1,120,   1,140,   1,160
Data  21,0,  21,20,  21,40,  21,60,  21,80,  21,100,  21,120,  21,140,  21,160
Data  41,0,  41,20,  41,40,  41,60,  41,80,  41,100,  41,120,  41,140,  41,160
Data  61,0,  61,20,  61,40,  61,60,  61,80,  61,100,  61,120,  61,140,  61,160
Data  81,0,  81,20,  81,40,  81,60,  81,80,  81,100,  81,120,  81,140,  81,160
Data 101,0, 101,20, 101,40, 101,60, 101,80, 101,100, 101,120, 101,140, 101,160
Data 121,0, 121,20, 121,40, 121,60, 121,80, 121,100, 121,120, 121,140, 121,160
Data 141,0, 141,20, 141,40, 141,60, 141,80, 141,100, 141,120, 141,140, 141,160
Data 161,0, 161,20, 161,40, 161,60, 161,80, 161,100, 161,120, 161,140, 161,160

' 16 x 9 = 90 + 54 = 144
Palette 0,$FFFFFF,$FF0000,$00FF00,$0000FF,$FF00FF,$FFFF00,$00FFFF,$FF7700,$00FF77,$7700FF,$FF0077,$77FF00,$0077FF
Cls 0 : Ink 1
N=1
For N=1 To 72
    Ink N Mod 10 + 2
    Box X(N),Y(N)+1 To X(N)+16,Y(N)+16+1
    Plot X(N),Y(N)+1 ' should be full intensity color
    Plot X(N)+16,Y(N)+16+1 ' should be full intensity color
    Plot X(N)+16,Y(N)+1
    Plot X(N),Y(N)+16+1
Next N
// Each of the boxes printed should be drawn in the same full intensity color as the corner dots. 
// Apparently, Plot is using the correct color, but Box, Draw, etc. are shown in much lower intensity.
// Also, the lines drawn for the box are too thick!